SCBH19-100/10-NX1 - TAIXUANTECH

SCBH19-100/10-NX1 Three-Phase Two-Winding Dry-Type Off-Circuit Tap-Changer Distribution Transformer

10kV Dry-Type Amorphous Alloy Distribution Transformer Series

SCBH19-100/10-NX1 Three-Phase Two-Winding Dry-Type Off-Circuit Tap-Changer Distribution Transformer

The SCBH19-100/10-NX1 is a three-phase, two-winding dry-type distribution transformer with epoxy resin casting, an amorphous alloy core, and an off-circuit tap changer, rated at 100kVA and 10kV on the high-voltage side. Designed to meet Class 1 energy efficiency (NX1) under GB 20052-2024, its amorphous alloy core significantly reduces no-load loss compared with conventional silicon steel transformers. The transformer features vacuum-cast epoxy resin insulation, providing excellent flame retardancy, moisture resistance, and maintenance-free operation. The amorphous alloy core is made of high-quality ultra-thin alloy strips, and low-voltage windings use copper foil conductors, ensuring low partial discharge, low temperature rise, and strong short-circuit withstand capability. Typical applications include commercial buildings, hospitals, airports, metro stations, data centers, and other indoor locations where fire safety and high energy efficiency are essential.

Data Center Industrial & Commercial Utility & Grid

Rated Capacity: 100 kVA
Rated Voltage Ratio: 10/0.4 kV
Connection Group: Dyn11
Cooling Method: AN
Energy Efficiency Class: NX1
Standard：IEC 60076, GB/T 22072-2018

Product Details

Learn more about our products

Product Model SCBH19-100/10-NX1

No-Load Loss ≤0.09 kW

Rated Capacity 100 kVA

No-Load Current ≤0.5%

Phase 3-phase

Load Loss (120°C) ≤1.415 kW

Rated Voltage Ratio 10/0.4 kV

Short-Circuit Impedance 4%

HV Tapping Range ±5%

Temperature Rise Limit Winding ≤100K (F-class)

Rated Frequency 50 Hz

Noise (Sound Pressure Level) ≤46 dB(A)

Connection Group Dyn11

Protection Degree IP20 (IP23 available)

Cooling Method AN

Standard IEC 60076, GB/T 22072-2018

Insulation Class F (155°C), LI75 AC28 / AC5

Energy Efficiency Class NX1

01.

Core advantages

Class 1 Energy Efficiency (NX1)

Complies with GB 20052-2024 Class 1 energy efficiency standard. The amorphous alloy core reduces no-load loss by approximately 60–80% compared with conventional silicon steel transformers, delivering significant energy savings over the transformer's service life, especially for continuous light-load applications such as data centers and commercial buildings. Actual measured losses are typically lower than reference values, and detailed test data can be provided upon request.

Vacuum-Cast Epoxy Resin

High and low voltage windings are fully impregnated in F-class epoxy resin under vacuum conditions, providing excellent flame retardancy, moisture resistance, and pollution resistance. The transformer is maintenance-free and suitable for indoor installation, including basements, tunnels, and other enclosed spaces.

Low Partial Discharge & Strong Short-Circuit Withstand

Optimized insulation structure and copper foil low-voltage windings ensure low partial discharge and strong short-circuit withstand capability. The transformer maintains stable operation under continuous load with a long service life. Amorphous alloy cores also offer excellent resistance to harmonic loads, making them suitable for renewable energy and variable-frequency drive applications.

02.

Application scenarios

No data was found

01.

Authoritative Certification

Our transformers are CE certified, ensuring full compliance with EU safety, health, and environmental standards.

Our transformers are UL certified, confirming they meet rigorous ANSI/IEEE safety standards for North American market entry.

ASTA

Our transformers have obtained ASTA type-test certification, verifying IEC 60076 compliance.

EAC

Our transformers are EAC certified, ensuring compliance with safety and EMC regulations for the Eurasian market.

SASO

We provide SASO-compliant transformers and assist clients in obtaining the Batch Certificate of Conformity (CoC) through the SABER platform.

02.

Quality Assurance

Partner Factory Audit

Regular on-site audits of partner factories to verify ISO, CE, and UL certifications.

Full-Process Quality Control

From raw material inspection to pre-shipment final inspection, every unit is checked against specifications.

Comprehensive Test Reports

Each transformer includes a detailed factory test report. 100% full inspection before dispatch.

Third-Party Inspection Support

SGS, BV, or other accredited third-party inspection available upon customer request.

01.

Technical Documents

No data was found

02.

Certification Materials

No data was found

10kV Dry-Type Amorphous Alloy Distribution Transformer Series – Full Specifications

10kV, 3-phase, 2-winding, dry-type, amorphous alloy core, off-circuit tap-changer, distribution transformer, 30-2500kVA
Model	Rated Capacity (kVA)	HV (kV)	HV Tapping Range	LV (kV)	Vector Group	No-Load Loss (kW)	Load Loss (kW)			Impedance Voltage (%)
Model	Rated Capacity (kVA)	HV (kV)	HV Tapping Range	LV (kV)	Vector Group	No-Load Loss (kW)	B（100℃）	F（120℃）	H（145℃）	Impedance Voltage (%)
SCBH15-30/10-NX3	30	10，10.5，11	±5%	0.4	Dyn11	0.070	0.670	0.710	0.760	4
SCBH17-30/10-NX2	30	10，10.5，11	±5%	0.4	Dyn11	0.060	0.605	0.640	0.685	4
SCBH19-30/10-NX1	30	10，10.5，11	±5%	0.4	Dyn11	0.050	0.605	0.640	0.685	4
SCBH15-50/10-NX3	50	10，10.5，11	±5%	0.4	Dyn11	0.090	0.940	1.000	1.070	4
SCBH17-50/10-NX2	50	10，10.5，11	±5%	0.4	Dyn11	0.075	0.845	0.900	0.965	4
SCBH19-50/10-NX1	50	10，10.5，11	±5%	0.4	Dyn11	0.060	0.845	0.900	0.965	4
SCBH15-80/10-NX3	80	10，10.5，11	±5%	0.4	Dyn11	0.120	1.290	1.380	1.480	4
SCBH17-80/10-NX2	80	10，10.5，11	±5%	0.4	Dyn11	0.100	1.160	1.240	1.330	4
SCBH19-80/10-NX1	80	10，10.5，11	±5%	0.4	Dyn11	0.085	1.160	1.240	1.330	4
SCBH15-100/10-NX3	100	10，10.5，11	±5%	0.4	Dyn11	0.130	1.480	1.570	1.690	4
SCBH17-100/10-NX2	100	10，10.5，11	±5%	0.4	Dyn11	0.110	1.330	1.415	1.520	4
SCBH19-100/10-NX1	100	10，10.5，11	±5%	0.4	Dyn11	0.090	1.330	1.415	1.520	4
SCBH15-125/10-NX3	125	10，10.5，11	±5%	0.4	Dyn11	0.150	1.740	1.850	1.980	4
SCBH17-125/10-NX2	125	10，10.5，11	±5%	0.4	Dyn11	0.130	1.565	1.665	1.780	4
SCBH19-125/10-NX1	125	10，10.5，11	±5%	0.4	Dyn11	0.105	1.565	1.665	1.780	4
SCBH15-160/10-NX3	160	10，10.5，11	±5%	0.4	Dyn11	0.170	2.000	2.130	2.280	4
SCBH17-160/10-NX2	160	10，10.5，11	±5%	0.4	Dyn11	0.145	1.800	1.915	2.050	4
SCBH19-160/10-NX1	160	10，10.5，11	±5%	0.4	Dyn11	0.120	1.800	1.915	2.050	4
SCBH15-200/10-NX3	200	10，10.5，11	±5%	0.4	Dyn11	0.200	2.370	2.530	2.710	4
SCBH17-200/10-NX2	200	10，10.5，11	±5%	0.4	Dyn11	0.170	2.135	2.275	2.440	4
SCBH19-200/10-NX1	200	10，10.5，11	±5%	0.4	Dyn11	0.140	2.135	2.275	2.440	4
SCBH15-250/10-NX3	250	10，10.5，11	±5%	0.4	Dyn11	0.230	2.590	2.760	2.960	4
SCBH17-250/10-NX2	250	10，10.5，11	±5%	0.4	Dyn11	0.195	2.330	2.485	2.665	4
SCBH19-250/10-NX1	250	10，10.5，11	±5%	0.4	Dyn11	0.160	2.330	2.485	2.665	4
SCBH15-315/10-NX3	315	10，10.5，11	±5%	0.4	Dyn11	0.280	3.270	3.470	3.730	4
SCBH17-315/10-NX2	315	10，10.5，11	±5%	0.4	Dyn11	0.235	2.945	3.125	3.355	4
SCBH19-315/10-NX1	315	10，10.5，11	±5%	0.4	Dyn11	0.195	2.945	3.125	3.355	4
SCBH15-400/10-NX3	400	10，10.5，11	±5%	0.4	Dyn11	0.310	3.750	3.990	4.280	4
SCBH17-400/10-NX2	400	10，10.5，11	±5%	0.4	Dyn11	0.265	3.375	3.590	3.850	4
SCBH19-400/10-NX1	400	10，10.5，11	±5%	0.4	Dyn11	0.215	3.375	3.590	3.850	4
SCBH15-500/10-NX3	500	10，10.5，11	±5%	0.4	Dyn11	0.360	4.590	4.880	5.230	4
SCBH17-500/10-NX2	500	10，10.5，11	±5%	0.4	Dyn11	0.305	4.130	4.390	4.705	4
SCBH19-500/10-NX1	500	10，10.5，11	±5%	0.4	Dyn11	0.250	4.130	4.390	4.705	4
SCBH15-630/10-NX3	630	10，10.5，11	±5%	0.4	Dyn11	0.420	5.530	5.880	6.290	4
SCBH17-630/10-NX2	630	10，10.5，11	±5%	0.4	Dyn11	0.360	4.975	5.290	5.660	4
SCBH19-630/10-NX1	630	10，10.5，11	±5%	0.4	Dyn11	0.295	4.975	5.290	5.660	4
SCBH15-630/10-NX3	630	10，10.5，11	±5%	0.4	Dyn11	0.410	5.610	5.960	6.400	6
SCBH17-630/10-NX2	630	10，10.5，11	±5%	0.4	Dyn11	0.350	5.050	5.365	5.760	6
SCBH19-630/10-NX1	630	10，10.5，11	±5%	0.4	Dyn11	0.290	5.050	5.365	5.760	6
SCBH15-800/10-NX3	800	10，10.5，11	±5%	0.4	Dyn11	0.480	6.550	6.960	7.460	6
SCBH17-800/10-NX2	800	10，10.5，11	±5%	0.4	Dyn11	0.410	5.895	6.265	6.715	6
SCBH19-800/10-NX1	800	10，10.5，11	±5%	0.4	Dyn11	0.335	5.895	6.265	6.715	6
SCBH15-1000/10-NX3	1000	10，10.5，11	±5%	0.4	Dyn11	0.550	7.650	8.130	8.760	6
SCBH17-1000/10-NX2	1000	10，10.5，11	±5%	0.4	Dyn11	0.470	6.885	7.315	7.885	6
SCBH19-1000/10-NX1	1000	10，10.5，11	±5%	0.4	Dyn11	0.385	6.885	7.315	7.885	6
SCBH15-1250/10-NX3	1250	10，10.5，11	±5%	0.4	Dyn11	0.650	9.100	9.690	10.370	6
SCBH17-1250/10-NX2	1250	10，10.5，11	±5%	0.4	Dyn11	0.550	8.190	8.720	9.335	6
SCBH19-1250/10-NX1	1250	10，10.5，11	±5%	0.4	Dyn11	0.455	8.190	8.720	9.335	6
SCBH15-1600/10-NX3	1600	10，10.5，11	±5%	0.4	Dyn11	0.760	11.050	11.730	12.580	6
SCBH17-1600/10-NX2	1600	10，10.5，11	±5%	0.4	Dyn11	0.645	9.945	10.555	11.320	6
SCBH19-1600/10-NX1	1600	10，10.5，11	±5%	0.4	Dyn11	0.530	9.945	10.555	11.320	6
SCBH15-2000/10-NX3	2000	10，10.5，11	±5%	0.4	Dyn11	1.000	13.600	14.450	15.560	6
SCBH17-2000/10-NX2	2000	10，10.5，11	±5%	0.4	Dyn11	0.850	12.240	13.005	14.005	6
SCBH19-2000/10-NX1	2000	10，10.5，11	±5%	0.4	Dyn11	0.700	12.240	13.005	14.005	6
SCBH15-2500/10-NX3	2500	10，10.5，11	±5%	0.4	Dyn11	1.200	16.150	17.170	17.450	6
SCBH17-2500/10-NX2	2500	10，10.5，11	±5%	0.4	Dyn11	1.020	14.535	15.445	16.605	6
SCBH19-2500/10-NX1	2500	10，10.5，11	±5%	0.4	Dyn11	0.840	14.535	15.445	16.605	6
Note： 1.Tapping range options: ±5% or ±2×2.5%. ±5% is shown as default in this table. Other tapping ranges are available upon request. 2.Other high and low voltages are available upon request. 3.Vector group options: Dyn11 . Other vector groups are available upon request. 4.Insulation class: B/F/H available. Load losses are shown for reference temperatures of 100°C (Class B), 120°C (Class F), and 145°C (Class H) respectively. 5.6kV amorphous alloy dry-type transformers are available upon request. Please contact us for project-specific solutions. 6.For IEC, ANSI, or other standards, or special frequency requirements, please contact us for a customized datasheet.

* For specific product requests, please Contact Us for customized solutions to your needs.

Contact information

Leave your contact information to download documents

SCBH19-100/10-NX1 Three-Phase Two-Winding Dry-Type Off-Circuit Tap-Changer Distribution Transformer

10kV Dry-Type Amorphous Alloy Distribution Transformer Series

SCBH19-100/10-NX1 Three-Phase Two-Winding Dry-Type Off-Circuit Tap-Changer Distribution Transformer